cart (0)

Insulated Thermal Fire Rated Pipe Sleeve 17mm

Product Code: AFIPS17/2E

Suitable for a wide range of fire walls and floors. | Suitable for a wide range of pipe types | Internal diameter size 17mm | 2 Hour Fire Rating | Tested to BS476: Part 20 | CE Labelled

£13.44 (ex. VAT)
For in stock items Order by 2pm, get it tomorrow!


Key Points:

  • Suitable for fire protecting a wide range of plastic and metal pipes.
  • Astroflame brand:  'ASTRO THERMAL FIRE PS'
  • Tested to BS476: Part 20
  • Tested to BS EN 1366-3
  • 2 Hours Fire Rating
  • CE Mark ETA - 15-0619, CE-1224-CPR-0055
  • No additional metal sleeving or lining out of the partition aperture required
  • Excellent Acoustic Insulation
  • Maintains thermal insulation for the pipe
  • For use through a wide range of fire partition walls and floors.
  • Allows for thermal movement of pipe
  • Cost effective, can be cut to length
A cost effective product for fire stopping pipe penetrations, eg. plastic and metallic plumbing. Maintains similar thermal and acoustic properties as standard mineral fibre insulation to ensure compliance with water bye laws and building regulations for cold and hot water pipes and heating systems. In a fire the pipe sleeve sleeve expands to fill the available space between the pipe and the penetration.

In the case of a plastic pipe the sleeve will crush and close off the pipe as it forms a solid char, preventing the passage of fire and smoke.   

  • Length 300mm. Wall thickness 27mm.
  • Internal diameter size 17mm.
  • Tested in plasterboard partition, mineral fibre batt, solid walls and floors. Tested on the following pipe sizes to BS 476 Part 20 and BS EN 1366-3 for up to 2 hours.

BS 476 part 20

Copper 12mm - 160mm 2 hours
Stainless Steel 15mm - 160mm 2 hours
Mild Steel 15mm - 165mm 2 hours
Cast Iron 15mm- 160mm 2 hours
PVC 55mm- 110mm
2 hours
90 mins
Polybutylene 12mm - 28mm 2 hours
HDPE 15mm - 160mm 2 hours

EN 1366-3

Metal 15mm - 158mm EI 120 Wall
Metal 159mm E120 EI30 Wall
PVC 43mm - 160mm EI 120 min wall & floor
HDPE 40mm - 110mm 120 min wall & floor
HDPE 160mm EI 90 wall / EI 120 floor

All sleeves have been tested with a 25mm nominal wall thickness. Sleeves have been tested cut flush to the wall for metal pipes only and floor for metal and plastic pipes. Sleeves have also been tested in walls, for plastic pipes, leaving 25mm exposed for connection to standard pipe insulation.

The sleeve is simple to install, easy to cut and one sleeve can replace two collars. For metal pipes the sleeve may also be fitted flush to the wall for a clean line solution.

Test Matrix - BS 476 and / or BS EN 1366-3 for 120mins

Pipe Material Diameter Blockwork Wall Solid Floor Mineral batt Plasterboard Wall
COPPER 15mm - 160mm
CAST IRON 15mm - 160mm
MILD STEEL 15mm - 160mm
STAINLESS STEEL 15mm - 160mm
PVC 55mm - 110mm
PVC 160mm
PVC-U 15mm - 160mm
HDPE 15mm - 160mm * *

* HDPE 160mm limited to EI90

For specific details of approved pipe materials, pipe thickness and substrates check with Stormflame.

  • BS476 part 20, 2 hour rated at Chiltern International Fire 132 minutes integrity and insulation BS EN 1366-3.
  • Acoustically Tested in plasterboard to BS EN ISO 140-3 and BS EN ISO 717:1977

Download and review any of the following information:

Certification/Fire Test Reports:

CE InformationCE Marked Documents
'DoP's are 'Declaration of Performance'
'CoC's are 'Certificate of Constancy of Performance'
'ETA' 'European Technical Assessment Sheet'


  • Brand:
  • Condition:
  • Product Code:
  • Ratings & Reviews

    Write a review
    • Be the first to review this product.