Latest News   |  New product Blue60 Frame Foam   |  Products in the news : Cavity Firestop & Ventilated Fire Barriers.

Home > Fire Grilles and Faceplates

Intumescent Fire Grilles


Fire Grilles are tested to: BS 476: Part 22 1987 and EN 1634: Part 2 with a 60 minutes fire rating. Suitable for door or solid block wall mounting up to 1 metre from floor level. Mild steel case with vermin proof wire mesh.  80% free ventilation area.

Face Plates (Air Transfer Plates / Ventilation Grilles) are manufactured from 2Oswg mild steel with a Satin Aluminium look finish applied. The louvres have an 8.5mm pitch and 30% downward deflection and allow  70% free ventilation.

The video below shows a fire grille and face plate installation in a fire door.

 



 

Intumescent Grilles
Intumescent Grilles Intumescent ventilation grille for mounting in doors & solid block walls. Certified for up to 1 hour fire protection.
Fire Grille Face Plates
Fire Grille Face Plates Mild Steel Louvered Face Plates - decorative cover for fire grilles or for stand alone use.

Products
Fire Rated Sealant - (Intumescent mastic)
Fire Rated Sealant - (Intumescent mastic) Intumescent mastic tested to EN 1366-3 : 2009 and EN 1366-4 : 2006 | For interior or exterior use | Acoustic Isolation to EN 10140 to 63dB | 310ml tubes | Off-white, brown or grey | Can be over-painted.
£1.91

As part of our policy of ongoing improvements, we reserve the right to modify, alter or change product specifications without giving notice. Product illustrations are representations only. All information provided is for guidance only, and as Intuchem.com (part of the Stormflame Group) has no control over the specific application or installation methods of the products, or of the prevailing site conditions, no warranties expressed or implied are intended to be given as to the actual performance of the products mentioned or referred to, and no liability whatsoever will be accepted for any loss, damage or injury arising from the use of the information given of products mentioned or referred to herein.

Information provided is to the best of our knowledge true and accurate and based upon current test data and product specification from third parties and is supplied for your guidance only. Customers should satisfy themselves to the suitability of the product based on the products limitation of applications and that the product is fit for purpose for their intended use and no guarantee is given or implied since the conditions of actual use are beyond our control. Intuchem.com (part of the Stormflame Group), disclaim any liability for loss, damage or other expense arising from the use of information, data or products mentioned or referred to by ourselves and reserve the right to change any details or specifications without notice. If you are in any doubt as to the suitability of a product for your intended application please contact our technical team on 01329 841 416 or email sales@stormflame.com and we will contact you.